AWA2 Single-Color Ionizing Water Vapor Fireplace

Reference Price:USD/
Brand:AFIRE
Material No.:UKDR8ZAC
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:AWA 20-50
Installation Service:Online guidance
Country of Origin:Guangdong Province, China
Warranty Period(Years):2
Customization Cycle:180 days
Indoor/Outdoor:Indoor
Size(mm):508×328×220
Color:
Black Series
Content:Matte Black Stainless Steel Panel
Weight(kg):12
Heating Area(㎡):0
Brand Name:AFIRE
Series Name:AWA2
Category:Fireplaces & Heaters/Simulated Fireplace
Customizable:No
Overview
Product Details/cases/detailed Images
Product Details/cases/detailed Images
Case Diagram
Case Diagram

Details

Fireplace: A real flame that is completely safe and eco-friendly

The AFIRE built-in ionizing water vapor fireplace series with natural cool flames is perfectly suited to modern lifestyles and increasingly urban living environments, delivering a new flame experience.

Firstly, the AFIRE negative-ion water vapor fireplace is entirely safe. It consumes only water and generates no heat, therefore posing no danger at all.

You can install the AFIRE built-in negative-ion water vapor fireplace anywhere without any concerns—from apartments and villas to all types of public spaces (hotels, clubs, restaurants, offices, spas, etc.). AFIRE deeply understands the importance of safety, so it perfectly aligns with your peace of mind, giving you total freedom!

Secondly, the negative-ion water vapor fireplace produces no unpleasant odors or harmful gases, including carbon monoxide or other polluting combustion residues. Moreover, it does not create condensation or dampness. The ultra-fine water ions are instantly absorbed by the air, leaving no water droplets on walls or cabinets. This is, in the truest sense, an intelligent, environmentally friendly, and safe fireplace that runs solely on tap water.


Would you truly feel secure with a real fire around you, your children, or your family?

The cool-flame negative-ion water vapor fireplace has no restrictions—it can be installed anywhere, including public places. What an innovation: a zero-emission, water-only cool-flame ionizing fireplace?!

AWA2 Single-Color Ionizing Water Vapor Fireplace

Fireplace: AWA2 (ADVANCE) — a high-tech, intelligent, and innovative fireplace

All research, experiments, and tests are conducted in AFIRE's own laboratory. The AWA2 (ADVANCE) negative-ion water vapor fireplace is a high-tech designed product, protected by multiple patents from the USPTO, EPO, and CNIPA, and certified by CE, KC, FCC, and other global standards.

Freely adjustable flame speed and height make the AFIRE ionizing water vapor fireplace the most realistic, beautiful, and dynamic water vapor fireplace you have ever seen on the market.

The AFIRE negative-ion water vapor fireplace is designed for design itself! It is easy to install—no chimney or venting required. This is a significant advantage of AFIRE fireplaces! Simply cut an opening to size, connect the fireplace to power, and slot it in within minutes!

The AFIRE negative-ion water vapor fireplace offers multiple control methods: remote control, on-device buttons, and smart home integration (dry contact).

AWA2 20-50 Single-Color Water Vapor Fireplace Installation Example

AWA2 40-100 Single-Color Water Vapor Fireplace Installation Example

AWA2 60-150 Single-Color Water Vapor Fireplace Installation Example

Fireplace: Built-in Negative-Ion Water Vapor Fireplace with Disinfecting and Sterilizing UVC Light

As is well known, in all water vapor fireplaces, the water in the tank is stagnant and prone to breeding large amounts of bacteria and viruses. While some steam fireplaces on the market can heat the water up to 70°C, this does not achieve high-temperature sterilization.

All AFIRE water fireplaces are now equipped with a patented UVC light, which protects and disinfects the air inside the fireplace, the water tank, and the generated water ions. The UVC germicidal lamp inside the fireplace can directly destroy the DNA chains of viruses, bacteria, spores, microorganisms, and other pathogens, removing up to 99.99% of bacteria and viruses, adding an extra layer of safety for your health.

The water ions produced by the ultrasonic atomizer, under the action of AFIRE's exclusive patented UVC technology, transform into negative oxygen ions found in natural oxygen bars. (Please note: not all UV lights provide disinfection and sterilization; nor do all UV lights achieve medical-grade performance. AFIRE's UVC lamps have undergone disinfection and sterilization testing reports from domestic research institutes and have been patented.)


Fireplace: AWA2 (ADVANCE) Built-in Negative-Ion Water Vapor Fireplace — Specifications and Parameters

· Built-in 50–100–150 cm

· Joined 200–250–300–350–400 cm and above (50 cm = 20 in)

· Matte black panel (RAL 9005)

· Remote control – On-device button

· Smart home connectivity (dry contact)

· Adjustable flame height and speed

· UVC light air and water disinfection

· One-key automatic water filling

· Manual draining (no water supply pipe)

· Natural single-color flame


The built-in negative-ion water vapor fireplace is extremely easy to install, requiring no chimney or vent. In addition, it produces no condensation or dampness—the ultra-fine water ions are instantly absorbed by the air, leaving no water droplets on walls or cabinets. Fireplace: Extra-long single-color series built-in negative-ion water vapor fireplace, 200 cm and above.

To install a longer fireplace, you can choose this joined multi-unit configuration. With fixed width and height, the modular assembly based on 50 cm multiples allows for unlimited extension. The AFIRE single-color AWA series built-in ionizing water vapor fireplace meets the strictest safety standards, so the cool-flame water vapor fireplace can be installed anywhere: whether in city apartments, country villas, hotels, clubs, saunas and spas, bars, restaurants, shopping malls, corporate offices, or any public venue... It presents a delicate yet spectacular "flame," creating a warm, comfortable, and romantic ambiance!

Models:

200cm–250cm–300cm–350cm–400cm–450cm–500cm–550cm–600cm or longer...

Attention

Use and Maintenance Precautions

The AFIRE ionizing water vapor fireplace is equipped with LED lights. To avoid glare, do not look directly down at the light source from above the fireplace.

The AFIRE water vapor fireplace contains an ultrasonic atomizer (the atomizer is a consumable item). Operation is very simple (see video). Note: Consumable items are not covered by warranty. Both the ultrasonic atomizer and the remote control fall into the category of consumables.

Note: If the unit will not be used for more than a week, please drain the water to prevent leakage. The drained water does not need to be connected to a wastewater system.

Atomizer Cleaning Steps:

• Turn off the fireplace, disconnect each atomizer connector plug from the fireplace, and remove the atomizer and bracket.

• Depending on the severity of limescale, apply a few drops of white vinegar directly onto the atomizer, let it sit for a few minutes, then scrub the atomizer and bracket clean with tap water.

• If there is residue such as limescale in the gap between the bottom of the atomizer and the bracket, unscrew the 4 screws securing the atomizer and clean its underside. Remember: avoid letting the atomizer's wiring come into contact with the vinegar solution.

• During cleaning, you may use a soft-bristled toothbrush or a soft cloth to gently scrub any visible stains on the white surface, metal housing, and bottom of the atomizer. Do not use hard-bristled brushes, scouring pads, or other harsh cleaning tools, as these may cause permanent damage to the atomizer.

• Reassemble the atomizer onto the bracket, then place the atomizer bracket back into the mist chamber.

• Before tightening the atomizer cover, ensure that the atomizer wiring is placed inside the groove on the side of the mist chamber. Reconnect the atomizer wiring plug to the fireplace, and the atomizer cleaning is complete.

Fireplace Cleaning Steps:

• If your fireplace is directly connected to the tap water supply, turn off the water supply valve.

• For AWPR2 series models, connect the inlet/drain hose to the port next to the fireplace's control button. (For AWAL or AWA2 series models, use a manual drain pump and place it into the water tank and mist chamber respectively to drain manually.)

• Place the outlet end of the inlet/drain hose into a bucket, then press and hold the left button (B2) for 5 seconds to start draining. When draining stops, some water will remain in the mist chamber; this is normal. You can use a smaller siphon hose, a large glass dropper, or a clean cotton cloth to absorb the small amount of remaining water inside the mist chamber. Try to avoid placing any material that may shed debris into the mist chamber.

• After the fireplace is drained, add a mixture of water and white vinegar in a 4:1 ratio into the fireplace. Alternatively, pour the 4:1 water-vinegar solution directly into the mist chamber, being careful not to overfill, as this may cause overflow. When the solution level is just above the top of the atomizer itself (approximately 5.5–6 cm from the bottom of the mist chamber, with a water capacity of about 1000 ml per mist chamber), the fireplace will have enough vinegar solution. Caution: overfilling may cause excess vinegar solution to leak from the front fan.

• As with the atomizer soaking operation described above, allow the vinegar solution to sit in the tank for about 10–20 minutes, letting it react with any limescale deposits on the float sensor, making them easier to remove.

• Do not operate the fireplace during the vinegar solution cleaning process.

• After the soaking period (before draining), quickly shake the atomizer bracket up and down to agitate the vinegar solution in each mist chamber, helping to dislodge limescale residues from the float sensor. At this point, you can hear the float sensor moving inside the lower tank; repeat this action 10–15 times for each mist tube.

• Drain the vinegar solution from the fireplace in the same way as normal draining. Press and hold the left button (B2) for 5 seconds to start draining (AWAL and AWA2 series require a manual drain pump). When draining stops, some water will remain in the mist chamber; this is normal. You can use a smaller siphon hose, a large glass dropper, or a clean cotton cloth to absorb the small amount of remaining water. Try to avoid placing any material that may shed debris into the mist chamber.

• After the vinegar solution is drained, fill the fireplace tank with water. If it is connected directly to the tap water supply, reopen the water supply valve and the system will automatically refill upon startup. You can also use the inlet/drain hose and press and hold the fill button (B1) to add water.

• You need to perform two complete fill-and-drain cycles on the entire unit to ensure the removal of vinegar solution and all suspended limescale and dust residues. After filling the system for the third time, the fireplace can be used as usual.

• Wipe the fireplace surface with a damp cloth to remove any dust or limescale marks.

Cleaning the atomizers 2–3 times a year and performing a full system clean 1–2 times a year will help extend the life of the atomizers, float sensor, and the fireplace itself. However, irregular use or hard water areas may require more frequent cleaning. If you have any questions, please feel free to contact your local dealer or us for assistance. Once you try these cleaning steps yourself, you will find that maintaining your fireplace is very simple and effortless.