30cm Double-Burner Built-in Gas Cooktop

Reference Price:USD/
Brand:De Dietrich
Material No.:V64O30B4
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:JZTDPG732
Country of Origin:Italy
Warranty:Whole unit 1 year, main parts 3 years
Material:Glass panel
Color:
Black Series
Total Weight:7kg
Size:HxWxD(mm): 69 x 300 x 515
Brand Name:De Dietrich
Category:Electrical Appliances/Kitchen Appliances
Customizable:No
Overview
Product Details/cases/detailed Images
Product Details/cases/detailed Images
Case Diagram
Case Diagram

Details

Product Features
• Width: 30 cm
• Easy-clean glass panel
• Cast iron pan supports
• Copper alloy burner
• Thermocouple flame-out safety device
• Electronic pulse ignition
• Dual-knob control

Attention

1. The gas hob comes with a power cord with plug, length 1 meter, to be connected to a standard earthing socket (10A). The power socket should be located in the cabinet below or beside the hob, within 500 mm from the center of the appliance. The gas supply outlet should also be located in the cabinet below or beside the hob, within 500 mm from the center. It is not recommended to place the power socket and gas outlet in the same cabinet. The customer must provide ventilation grilles on the cabinet door below the hob (see illustration) to ensure adequate air supply and circulation, with a vent area of at least 200 cm². To ensure proper air supply, circulation and correct gas pipe connection, a clearance height of 150 mm must be left underneath the hob base.
2. The gas hob must be placed on a solid, stable worktop, away from flammable materials such as curtains, and ensure nothing can fall from the ceiling above it. Do not install it in areas with heavy draughts.
3. A minimum distance of 300 mm must be maintained between the hob and adjacent cabinets, side walls or gas main pipes, and at least 1000 mm clearance from overhead cabinets. The wall and cabinet surfaces behind the hob must be made of heat-resistant and non-combustible materials.
4. Use only gas-approved stainless steel flexible hose with a 20 mm (1/2") female thread fitting, maximum length 2 meters, and check for gas leaks. Do not use low-temperature or flexible PVC hoses. Regularly inspect and replace the gas hose; old hoses can develop cracks or loosen and cause gas leaks.
5. This gas hob has undergone rigorous safety testing before leaving the factory. Do not dismantle the hob body during gas pipe installation, to avoid gas leaks that could cause poisoning or fire.
6. If the hob interferes with the cabinet side panel during installation, cut an opening in the side panel with a height of 60 mm.
7. If the hob is to be installed above an oven, a wooden board must separate the two appliances, with at least 150 mm clearance between the hob base and the board. The installation must comply with local regulations and accident prevention standards (e.g., install a gas alarm). Pay special attention to the routing of electrical cables and gas pipes; they must not come into contact with hot parts of the oven.
8. If the hob is installed above an oven that does not have forced cooling ventilation, suitable ventilation openings must be provided to ensure adequate airflow, with a vent area of at least 200 cm².
9. The gas hob is not supplied with a gas hose or shut-off valve; the customer must purchase and install them separately.
10. The worktop installer is responsible for cutting the opening according to the appliance's built-in dimensions.