ABA Composite Click Lock Vinyl Flooring

Reference Price:USD/㎡
Brand:RIEE
Material No.:VLDXZBK1
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:MT-0431
Country of Origin:Anhui, China,China
Brand Name:RIEE
Series Name:Wood Grain Series (II)
Category:Flooring/PVC Flooring
Customizable:Yes
Material Spelling
Overview
Case Diagram
Case DiagramMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial Image

Details

The main materials of the product are polyvinyl chloride (PVC) and calcium carbonate (natural stone powder). The production process is as follows: 1. Mixing: raw materials are blended using large mixing machines; 2. Extrusion: the blended material is extruded into a substrate of the required thickness through assembly line equipment; 3. Steam Hot Pressing: a large steam hot press with 500 tons of pressure bonds the decorative film, wear layer, and substrate together under heat for 45 minutes; 4. Conditioning: the product rests for 24 hours to allow exposure to air; 5. Tempering: the product is immersed in hundred-meter-long cold and hot water tanks to improve dimensional stability through thermal expansion and contraction; 6. Conditioning: another 24-hour resting period to allow contact with air; 7. Grooving: cut to specified dimensions and click-lock grooves are machined; 8. Inspection: pass laboratory testing; 9. Attaching: apply acoustic underlayment; 10. Packaging; 11. Warehousing. Available sizes: 600*126 / 914*150 / 1220*180 / 1530*180 / 1800*228 mm.

Attention

1. Remove dust and debris from the surface of the click-lock flooring. 2. Clean off maintenance wax, grease, dust, and other dirt from the flooring surface, then use a wet vacuum to extract the dirty water. 3. Rinse with clean water and vacuum up. 4. If necessary, apply 1-2 coats of high-strength floor finish.