
Realistic Flame Water Vapor Fireplace, 1.2m, Ultra-Slim & Low with Glass
.jpg?x-oss-process=image/resize,w_900,m_lfit)

.jpg?x-oss-process=image/resize,w_900,m_lfit)
.jpg?x-oss-process=image/resize,w_900,m_lfit)
.jpg?x-oss-process=image/resize,w_900,m_lfit)












Details






Attention
1. Fireplace recess preparation: Prepare the recess and electrical supply in advance. After installation, the recess must meet moisture-proof and anti-reflective requirements to ensure proper operation. Importantly, the fireplace recess must be an independent cavity; it should not be connected to the interior of the feature wall or ceiling voids. This prevents downward airflow into the recess when air conditioning or fresh air systems are running, which can disrupt the flame effect.
2. No additional access panels, air intakes, or ventilation grilles are required for this product.
3. Continuous airflow will disturb the flame pattern. Avoid placing the fireplace near windows, doors, air conditioning vents, or fresh air system outlets where drafts are present. Airflow must not be directed at the fireplace.
4. A glass panel is included for the front of the fireplace as standard, with a height of 150 mm. The installation kit includes glass brackets, fixing screws, and the glass itself. The front panel comes pre-drilled with bracket mounting holes from the factory, so no additional on-site preparation for glass fitting is necessary.
5. For see-through installations or room dividers, it is recommended to add a second glass panel at the rear.
6. When operating the fireplace, use only purified or filtered water as fuel. Avoid using tap water.
7. The fireplace uses a standard 220V, 10A three-pin plug with a 1.5 m power cord. The power outlet is located at the bottom right side (when facing the unit). Please ensure the wall socket is positioned within reach of the cord during installation planning to avoid the need for additional electrical work later.
