Dune Traces

Reference Price:USD/pieces
Brand:chailab
Material No.:VTY3L56L
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:FL152L58
Country of Origin:China
Color:
Yellow Series
Size(mm):152*152
Surface Sheen:Smooth Surface
Overall Thickness:10
Flammability:A1
Brand Name:chailab
Series Name:Enamel Wall Tile
Category:Tile/Glazed Tile/Others
Customizable:Yes
Overview
Structural Diagram
Structural Diagram
Case Diagram
Case Diagram

Details

Attention

Paying of handmade enamel bricks and matters needing attention 1. Grassroots treatment-suitable for concrete walls, first of all, smooth out the concrete protruding from the wall. The concrete wall constructed with large steel molds should be chiseled and fully brushed with steel wires. Brush it once, and then water it to moisten it. If the wall is smooth, this link can be omitted. 2. Wall leveling and hoisting vertically and leveling-ensure that the upper and lower verticality error does not exceed 2 mm. If it is found that it is not vertical, cement mortar can be used for leveling. 3. Prepare before laying-It is strictly prohibited to soak in water before laying, and conduct an appearance inspection before pasting. Brick arrangement and division are carried out according to design requirements and construction template, and the whole brick should be used for arranging bricks. 4. Laying and pasting wall tiles-After the cement mortar is completely dried, use a jig-shaped knife scraper to evenly apply a special adhesive for wall tiles with a thickness of no more than 3 - 5mm on the wall surface. Before pasting the bricks for the second time, there must be no powder on the surface. 5. Paving details: Paving order, from bottom to top, from inside to outside, use a frame of ≥2mm to leave gaps between the tiles. After the tiles are laid on the wall, rub it left and right, and place the spacing crosses. straighten the frame and gently tap the surface with a rubber hammer to stabilize and ensure 100% fit between the tiles and the base surface. 6. If construction is carried out on non-cement base, corresponding structural glue or epoxy glue can be used. 7. Please use clear water soap or neutral weak acid non-irritating detergent for daily cleaning