Track Framing Light

Reference Price:USD/set
Brand:JODU-lighting
Material No.:VTZUS76L
Supplier: CONTACT USCONTACT US
Reset
Beam Angle:
Power(W):
Color Temperature(K):
Model:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:JDD2035-Smart-10W-20°~35°
Application:Exhibition Display
Indoor/Outdoor:Indoor Use
Light Intensity:None
Light Source Lifetime(hrs):30000
Accessory:Optical Filter
Luminous Flux(LM):325
Beam Angle:20°~35°
Material:Lamp body die-cast from high-quality aluminum, finished with anodized electrostatic powder coating.
Chip requirements:HONGOURTEK (USA)
Power(W):10
Color Rendering Index:95
Size(mm):∅37.5*153.5
Color Temperature(K):3000,3500,4000
Ingress Protection Rating:IP20
Remark:Angle-adjustable luminaire, horizontal 350°, vertical 90° adjustment
Color:
Black Series
Voltage:AC 100-265V
Dimming Control:0-10V Dimming,DALI dimming,Bluetooth dimming
Color Tolerance:SDCM≤5
Hole(mm):None
Installation Method:Track Type
Lamp Type:Track Light
Lead time:7-10 days
Lamp Bead Model:COB
Brand Name:JODU-lighting
Series Name:Van Gogh Track Adjustable Spotlight Series
Category:Engineering Lighting/Planetary
Customizable:Yes
Overview
Product Details/cases/detailed Images
Product Details/cases/detailed Images
Case Diagram
Case Diagram

Details

1. Boom Arm: Rotates 355° for free adjustment of the lighting angle 2. Cold-Forged Unibody Heat Sink: Made from 1070 pure aluminum, cold-forged into a single piece, with a thermal conductivity of 237 W/mK for exceptional heat dissipation, protecting the entire lamp’s lifespan 3. 355° Manual Beam Shaper: Loosen this screw to enable 355° beam adjustment 4. Optical-Grade Adjustable Aperture: Change the beam shape freely by adjusting the aperture blades 5. Zoom Damping Knob: Rotate to adjust the beam size 6. Focus Damping Knob: Rotate to adjust the beam sharpness 7. High-Quality Coated Optical Lens: Increases light transmission, reduces distortion, and eliminates blue fringing

Attention

The LED track light features a built-in driver. The luminaire must be installed on the track, and the track must be connected to a 220V mains power supply; otherwise, the LED module will be damaged. (Do not hot-plug. The luminaire must not be covered by thermal insulation or similar materials.)