Leg Curl Machine

Reference Price:USD/unit
Brand:MATRIX
Material No.:VZK3KMC3
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:G7-S72
Warranty (Years):1
Customization Cycle:60
Color:
Gray Series
Size:152.4 x 125.9 x 135 cm
Brand Name:MATRIX
Series Name:G7-S72
Category:Equipment/Fitness Products/Strength Equipment
Customizable:No
Overview
Case Diagram
Case Diagram

Details

1. Product Weight Stack: 90 kg / 200 lbs

2. Product Net Weight: 304 kg / 672 lbs

3. Product Dimensions: 152.4 x 125.9 x 135 cm

4. Easily adjust the back pad, tibia pad, and range of motion from a seated position; the angled seat and unique pivot position allow for full hamstring contraction

5. Adjustable thigh pad and thumb switch control for easy user setup; the soft, contoured thigh pad provides optimal comfort during use

6. Front placard: muscle illustration, exercise-specific stretching, start and finish exercise diagrams, correct machine movement

7. Frame finish: dedicated two-layer powder coat process

8. Uniform weight stack height: 135 cm / 53"

Attention

Correct Usage 1. Do not exceed the weight capacity of the training equipment. 2. If safety stops are provided, adjust them to an appropriate height. 3. Adjust the seat pad, leg pad, foot pad, range of motion adjustment device, or any other type of adjustment device to a comfortable starting position as much as possible. Ensure the adjustment device is fully locked to avoid sudden movement and injury. 4. If using a weight bench, sit on the bench and adjust to the proper training position. 5. Do not train with more weight than you can safely control. 6. Train within a reasonable controlled range. 7. Return the weight stack to the fully supported start position.

Warranty If you are in North America, visit matrixfitness.com for warranty information, as well as warranty exclusions and limitations.

Product Specifications Maximum User Weight Capacity 136 kg / 300 lbs Training Weight Capacity G7-S72: 93.4 kg / 207.5 lbs G7-S72B: 68 kg / 150 lbs G7-S72BH: 90 kg / 200 lbs Product Weight G7-S72: 320 kg / 706 lbs G7-S72B: 282 kg / 622 lbs G7-S72BH: 304 kg / 672 lbs Overall Dimensions (L x W x H)* 148.5 x 117 x 135 cm / 58.4 x 46 x 53 inches * Always maintain at least 0.6 m (24 inches) of clearance around MATRIX strength equipment for access and passage. Please note, the Americans with Disabilities Act (ADA) recommends a wheelchair passage width of 0.91 m (36 inches).

Maintenance Checklist Action Frequency Clean pads 1 Daily Inspect cables 2 Daily Clean guide rods Monthly Check hardware Monthly Inspect frame Every six months Clean machine As needed Clean grips 1 As needed Lubricate guide rods 3 As needed 1 Clean pads and grips with mild soap and water or a non-ammonia cleaner. 2 Inspect cables for cracks or wear; replace immediately if any. If cables are loose, tighten without lifting the top weight plate. 3 Lubricate guide rods with a Teflon lubricant. Apply lubricant to a cotton cloth and wipe the guide rods up and down.

Torque Values M10 bolts (Nyloc nut and Flowdrill) 77 Nm / 57 ft-lbs M8 bolts 25 Nm / 18 ft-lbs M8 plastic 15 Nm / 11 ft-lbs M6 bolts 15 Nm / 11 ft-lbs Pad bolts 10 Nm / 7 ft-lbs