Triceps Press Machine

Reference Price:USD/unit
Brand:MATRIX
Material No.:WHMOVLTU
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:G7-S42
Warranty (Years):1
Customization Cycle:60 Days
Color:
Black Series
Size:124 x 121 x 135 cm
Brand Name:MATRIX
Series Name:G7-S42
Category:Equipment/Fitness Products/Strength Equipment
Customizable:No
Overview
Case Diagram
Case Diagram

Details

1. Weight Stack: 120 kg / 265 lbs

2. Product Net Weight: 281.5 kg / 621 lbs

3. Dimensions: 124 x 121 x 135 cm

4. Rotating handles accommodate various users and offer different exercise options

5. Angled back pad reduces stress, improves stability, and enhances comfort

6. Front placards: muscle illustrations, machine-specific stretches, start and finish position diagrams, correct exercise motion

7. Frame Finish: Proprietary double-layer powder coat process

8. Standard weight stack height: 135 cm / 53"

Attention

Proper Use:

1. Do not exceed the weight capacity of the training equipment.

2. If safety stops are provided, adjust them to the appropriate height.

3. Whenever possible, adjust the seat, leg pads, foot pads, range-of-motion adjusters, or any other type of adjustment device to a comfortable starting position. Ensure the adjustment devices are fully tightened to avoid sudden movement and possible injury.

4. If present, sit on the exercise bench and adjust to the appropriate training position.

5. Never use a weight that is beyond your ability to safely control.

6. Perform exercises within a controlled range of motion.

7. Return weight plates to the fully supported starting position.

Warranty: If you are in North America, please visit matrixfitness.com for warranty information, as well as warranty exceptions and limitations.

Product Specifications: Maximum user weight: 136 kg / 300 lbs. Training weight capacity: G7-S42: 123.4 kg / 272.5 lbs; G7-S42B: 93 kg / 205 lbs; G7-S42BH: 120 kg / 265 lbs. Product weight: G7-S42: 305 kg / 673 lbs; G7-S42B: 254.5 kg / 561 lbs; G7-S42BH: 281.5 kg / 621 lbs. Overall dimensions (L x W x H)*: 124 x 121 x 135 cm / 48.8 x 47.7 x 53". *Always allow at least 0.6 m (24") of clearance around MATRIX strength equipment for access and passage. Please note that the Americans with Disabilities Act (ADA) recommends a wheelchair passage width of 0.91 m (36").

Maintenance Checklist: Action – Frequency: Clean pads – Daily; Inspect cables – Daily; Clean guide rods – Monthly; Inspect hardware – Monthly; Inspect frame – Semi-annually; Clean equipment – As needed; Clean grips – As needed; Lubricate guide rods – As needed. 1 Clean pads and grips with mild soap and water or an ammonia-free cleaner. 2 Inspect cables for cracks or wear; replace immediately if needed. If cable is too slack, tighten without lifting the top weight plates. 3 Lubricate guide rods with Teflon lubricant. Apply lubricant with a cotton cloth, wiping up and down the rod.

Torque Values: M10 Bolt (Nyloc Nut and Flowdrill) 77 Nm / 57 ft-lbs; M8 Bolt 25 Nm / 18 ft-lbs; M8 Plastic 15 Nm / 11 ft-lbs; M6 Bolt 15 Nm / 11 ft-lbs; Pad Bolts 10 Nm / 7 ft-lbs.