Freestanding Wood-Burning Fireplace - Customizable Stone Exterior

Reference Price:USD/unit
Brand:Austroflamm
Material No.:WLF3HSK1
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:Elisabeth
Installation Service:On-site survey and installation
Country of Origin:Austria
Warranty Period(Years):7
Customization Cycle:90-150 days
Heating Area(㎡):40-60
Weight(kg):205kg
Color:
White Series
Flame Type:Wood Burning
Indoor/Outdoor:Indoor
Content:Steel Plate & Marble
Brand Name:Austroflamm
Series Name:ELISABETH
Category:Fireplaces & Heaters/Real-fire Fireplace
Customizable:Yes
Overview
Product Details/cases/detailed Images
Product Details/cases/detailed Images
Structural Diagram
Structural Diagram
Case Diagram
Case DiagramMaterial ImageMaterial Image

Details



Attention

1. Firewood Usage: Use logs approximately 300 mm in length.

2. The fireplace relies on the natural pressure difference created by the chimney height to vent smoke outdoors. Therefore, the horizontal run of the flue pipe is recommended not to exceed 3 meters. Please consider the ease of smoke exhaust when choosing the installation location.

3. If the fireplace is placed on a wooden floor, it is recommended to install a base plate made of steel, stone, or glass underneath to prevent any stray sparks from the open door from falling onto the floor.

4. Installation Clearances: Maintain a rear clearance of more than 10 cm from the wall. The back of the fireplace does not generate excessive heat, so conventional materials can be used on the rear wall. Keep a 50 cm clearance on both the left and right sides free from combustible materials. Maintain a 1-meter clearance in front of the fireplace free from combustible materials.

5. Flue Configuration: The fireplace can be vented from the top or the rear. For rear venting, cover the top flue outlet with the included round steel plate and connect the flue pipe to the rear outlet.

6. The top oven has a built-in thermometer. You can adjust the oven temperature by toggling the Xtra Heat/Bake mode on top of the fireplace.

7. It is recommended to clean the ash from the firebox after every 2–3 uses. The fireplace is equipped with an ash pan at the bottom and comes with a dedicated tool for easy removal of the ash pan.

8. If the firewood has high moisture content, incomplete combustion may occur. Unburned carbon particles can stick to the glass. If the glass turns black, wait until the fireplace is not in use and has completely cooled. Use a slightly damp cloth or paper towel dipped in a small amount of cold wood ash from the firebox to wipe the glass—this cleans effectively. Avoid using chemical glass cleaners, as their ingredients may damage the fireplace’s enamel finish.

9. When the fireplace is lit, the front glass temperature can reach 200–300°C. Avoid touching it. The fireplace comes with heat-resistant leather gloves by default; please wear them when operating the fireplace.

10. Ignition: It is recommended to use wax fire starters to ignite the fireplace. Do not use liquid alcohol or other flammable materials to start the fire.

11. If children are nearby while the fireplace is lit, please exercise extra caution to prevent accidental contact, which may cause burns.