Solid Surface Freestanding Bathtub

Reference Price:USD/pcs
Brand:MUNK
Material No.:Y51MJPLK
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:B11728
Country of Origin:Guangdong Province, China
Suitable Crowd:Universal
Content:Engineered stone
Color:
White Series
Finish:Matte
Brand Name:MUNK
Category:Sanitaryware/Bathtub/Freestanding Bathtub
Customizable:Yes
Overview
Product Details/cases/detailed Images
Product Details/cases/detailed Images
Case Diagram
Case Diagram

Details

Freestanding solid-surface bathtub in composite acrylic or pure acrylic options.

Dimensions: 1700mm x 850mm x 750mm

Features a matte finish; colour and veining can be customised according to design requirements.

We use high-quality resin and aluminium powder, enhanced by our independently developed formula improvements and meticulous craftsmanship.

The product excels in yellowing resistance, crack resistance, tensile strength, stain resistance, load-bearing capacity and fire performance, lasting five to ten years or more.

Attention

In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please strictly follow the instructions below to prevent any permanent damage:

1. Avoid exposing the product to any strong chemicals, such as paint removers, heavy-duty cleaners, etc. If contact occurs, immediately rinse the surface with plenty of water.

2. Do not deliberately scratch or carve directly on the solid surface product.

3. It is recommended to run cold water simultaneously when pouring hot water.


Handling Minor Scratches:

First assess the severity of the scratch. It is advisable to begin with the finest grit sandpaper. Sand along the scratch in a straight line, and after some time, change the sanding direction by 90° and continue. This ensures all scratches are removed.

Note:

If sanding with the finest grit takes too long, you may try switching to a coarser grit sandpaper.

To minimize dust during sanding, dampen the surface beforehand.

After use, rinse the sandpaper to remove residues. It is recommended to dry the rinsed sandpaper and store it properly for future use.


Surface Care:

1. Most dirt and stains: Wash with soapy water or an ammonia-based cleaner, rinse and dry.

2. Watermarks: Wipe the watermark with a damp cloth, then dry with a clean dry cloth.

If stains persist after using the above methods, treat them using the scratch removal procedure.