
ABA Composite Click Lock Vinyl Flooring


















Details
The primary materials of the product are polyvinyl chloride (PVC) and calcium carbonate (natural stone powder). The manufacturing process is as follows: 1. Mixing – raw materials are blended using large-scale mixing machines; 2. Extrusion – the mixed material is extruded into a substrate of the required thickness through assembly line equipment; 3. Hot-press lamination – a 500-ton heavy-duty steam press bonds the decorative film, wear layer, and substrate together under heat for 45 minutes; 4. Conditioning – the product is left to rest for 24 hours to allow interaction with ambient air; 5. Annealing – the product is immersed in long hot and cold water baths to improve dimensional stability through thermal expansion and contraction; 6. Conditioning – another 24-hour rest to acclimate with the air; 7. Profiling – cutting to specified dimensions and milling click-lock profiles; 8. Inspection – laboratory testing to ensure quality standards; 9. Backing attachment – applying the acoustic underlayment; 10. Packaging; 11. Warehousing. Available sizes include: 600*126 / 914*150 / 1220*180 / 1530*180 / 1800*228
Attention
1. Remove dust and loose debris from the surface of the click-lock flooring. 2. Eliminate protective wax, grease, dust, and other stains, and extract the wastewater with a wet vacuum. 3. Rinse with clean water and extract the rinse water. 4. If needed, apply 1-2 coats of high-strength floor finish.
