
Water Treatment System


Details




Attention
1. Usage
a. Installation or relocation must be carried out by qualified professionals. Do not disassemble or modify the unit on your own.
b. Do not place any objects on top of the product. Never block the air outlet.
2. Installation
a. Keep the product away from all sources of ignition.
b. Do not install in an enclosed area or indoors. Adequate ventilation must be maintained at all times.
c. Before welding, the system must be thoroughly evacuated. On-site welding is not permitted; welding may only be performed by qualified personnel at an authorized service centre.
d. If an R32 refrigerant leak is detected during installation, stop the operation immediately. The pool heat pump must be returned to the service centre for proper handling.
3. Transport and storage
a. Ensure good ventilation at all times during transport.
b. Drive smoothly at a steady speed. Avoid sudden acceleration or hard braking to reduce cargo impact.
c. Keep the product away from all ignition sources.
d. Store in a bright, spacious, open, well-ventilated area with active ventilation equipment.
4. Repair safety
a. For repair or disposal, please contact an authorized service centre nearby.
b. Qualification requirements for service technicians: All working personnel must hold a valid certificate issued by an industry-recognized assessment body, certifying their competence in the safe handling of refrigerants according to the relevant assessment specifications.
c. The unit is charged with R32 refrigerant. During servicing, strictly follow the manufacturer's instructions. This section addresses the special requirements for servicing R32 refrigerant appliances. For detailed repair procedures, service personnel should refer to the technical service manual.
